← Articles

Kang et al: Biomechanical Comparison of Double 2.3-mm Headless Cannulated Self-Compression Screws and Single 3.5-mm Cortical Screw in Lag Fashion in a Canine Sacroiliac Luxation Model
Veterinary and Comparative Orthopedics and Traumatology 1, 2024

🔍 Key Findings Summary

  • 20 cats with pelvic fractures treated using locking plates with only cortical screws
  • 28 fractures stabilized (ilium: 17, acetabulum: 6, ischium: 3, pubis: 2)
  • Implants: Primarily 1.5/2.0 mm LCPs or String-of-Pearls plates
  • Major complications in 2/20 cases (10%): sciatic entrapment, malunion requiring THA
  • Minor complications in 2/20 cases (10%): plate impingement, transient lameness
  • Clinical union in all cats by 8 weeks; all cats returned to full function
  • Authors conclude cortical screws alone can provide adequate fixation in feline pelvic fractures if screw purchase and bone quality are sufficient

Simini Surgery Review Podcast

How critical is this paper for crushing the Boards?

🚨 Must-know. I’d bet on seeing this.

📚 Useful background, not must-know.

💤 Skip it. Doubt it’ll ever show up.

Thanks for the feedback!
‍We'll keep fine-tuning the articles vault.
Oops — didn’t go through.
‍Mind trying that again?
← Articles

Kang et al: Biomechanical Comparison of Double 2.3-mm Headless Cannulated Self-Compression Screws and Single 3.5-mm Cortical Screw in Lag Fashion in a Canine Sacroiliac Luxation Model
Veterinary and Comparative Orthopedics and Traumatology 1, 2024

🔍 Key Findings Summary

  • 20 cats with pelvic fractures treated using locking plates with only cortical screws
  • 28 fractures stabilized (ilium: 17, acetabulum: 6, ischium: 3, pubis: 2)
  • Implants: Primarily 1.5/2.0 mm LCPs or String-of-Pearls plates
  • Major complications in 2/20 cases (10%): sciatic entrapment, malunion requiring THA
  • Minor complications in 2/20 cases (10%): plate impingement, transient lameness
  • Clinical union in all cats by 8 weeks; all cats returned to full function
  • Authors conclude cortical screws alone can provide adequate fixation in feline pelvic fractures if screw purchase and bone quality are sufficient

Simini Surgery Review Podcast

Join Now to Access Key Summaries to more Veterinary and Comparative Orthopedics and Traumatology Articles!
Log InSign Up

Multiple Choice Questions on this study

In Kang 2024 et al., on sacroiliac fixation strength, what was the primary failure mode for the double 2.3-mm HCS group?

A. Screw bending and pullout
B. Compression loss at ilium
C. Cancellous bone failure in sacrum
D. Screw loosening at ilium
E. Rotational failure at ilial cortex

Answer: Cancellous bone failure in sacrum

Explanation: Failure was typically within the sacral bone; no screw head pullout noted in HCS group
In Kang 2024 et al., on sacroiliac fixation strength, what was the statistically significant difference in screw diameter to sacral diameter ratio between groups?

A. HCS: 70%, Lag: 50%
B. HCS: 50%, Lag: 70%
C. HCS: 38%, Lag: 62%
D. HCS: 62%, Lag: 38%
E. HCS: 45%, Lag: 45%

Answer: HCS: 38%, Lag: 62%

Explanation: Table 1 showed HCS screws were smaller relative to sacral width; lag screw occupied larger percentage
In Kang 2024 et al., on sacroiliac fixation strength, which construct had significantly higher maximum failure load under rotational force testing?

A. Single 3.5-mm cortical screw in lag fashion
B. Double 2.0-mm cortical screws
C. Double 2.3-mm headless cannulated screws
D. 3.5-mm cortical screw with washer
E. Single 2.3-mm headless cannulated screw

Answer: Double 2.3-mm headless cannulated screws

Explanation: Double HCS provided significantly higher failure load vs single lag screw fixation
In Kang 2024 et al., on sacroiliac fixation strength, which implant required significantly longer placement time?

A. 3.5-mm lag screw
B. 2.3-mm cortical screw
C. 2.3-mm headless cannulated screws
D. Both were similar
E. SOP locking plate

Answer: 2.3-mm headless cannulated screws

Explanation: Mean placement time for HCS was 712 sec vs 379 sec for CS group (p<0.001)
In Kang 2024 et al., on sacroiliac fixation strength, which statement best describes screw placement accuracy in both groups?

A. More screw misplacements in lag group
B. HCS had frequent canal violations
C. All screws stayed within sacral body
D. At least one screw breached spinal canal
E. Lag group had better accuracy

Answer: All screws stayed within sacral body

Explanation: CT confirmed safe placement in all dogs; no breaches of spinal canal or sacral foramen

Elevate Your Infection Control Protocol

Implement Simini Protect Lavage for superior, clinically-proven post-operative skin antisepsis and reduced infection risk.

Start Your Free Trial TodayStart Your Free Trial

Review More Key Summaries from this Veterinary and Comparative Orthopedics and Traumatology Journal Issue

Redolfi

 et al: 

Complications and Long-Term Outcomes after Combined Tibial Plateau Leveling Osteotomy and Tibial Tuberosity Transposition for Treatment of Concurrent Cranial Cruciate Ligament Rupture and Grade III or IV Medial Patellar Luxation

Caldeira

 et al: 

In Vitro Biomechanical Study of Femoral Neck Fracture Fixation with Two or Three Cannulated Screws in Dogs

Boullenger

 et al: 

Clinical Presentation, Surgical Treatment, and Outcome of Traumatic Patellar Luxation in 11 Dogs and 5 Cats: A Single-Centre Retrospective Study between 2011 and 2022

Holman

 et al: 

Quantification of the Field of View for Standard Lateral Arthroscopy of the Canine Shoulder

Kang

 et al: 

Biomechanical Comparison of Double 2.3-mm Headless Cannulated Self-Compression Screws and Single 3.5-mm Cortical Screw in Lag Fashion in a Canine Sacroiliac Luxation Model